Service Hotline:
13906175842    0510-85262588
Asphalt barrel melting device

POSITION:HOME > Asphalt barrel melting device

DLT6 Asphalt barrel melting device


Drummed Asphalt Melting Equipment (Container) is mainly composed by off-barrel tank, elevator, hydraulic thruster and electric control system. The tank is divided into tow room—the upper room and lower room; the upper room is barreled asphalt melting compartment with heating plates and pipes all around; the heading pipe and asphalt barrel exchange heat by radiation to make the asphalt  away off the barrel. There are several lead rails to let the asphalt barrel in. The lower room mainly keeps on heating the asphalt out of the barrels to the pumping temperature (100 ℃); and then heated asphalt is pumped into the high temperature tank by the asphalt pump; if the heating time is extended, a higher temperature can be reached. The elevator is in cantilever construction, lift the asphalt barrel by electric hoist, then move horizontally and put the asphalt barrel on the lead rails; then the hydraulic thruster push the barrel into the upper room; at the same time, at the outlet of the other end an empty barrel is pushed out. There is an oil groove on the platform at the inlet for asphalt barrels to collect the dropping asphalt
The inlet and outlet of the facility are with the automatic spring closure devices; they can close automatically when a barrel is push in or out to reduce heat loss. There is a thermometer at the outlet of asphalt for observing the temperature.

Main technical parameters of equipment


5-6t/p 9-10t/p

Asphalt tank volume

16m³ 24m³

Cylinder stroke

1300mm 1300mm

Hydraulic thruster

7500kg 7500kg

Output asphalt temperature

130-160℃ 130-160℃

Power of machine

42KW 48KW

Quantity of barrels

34 57

External dimension

11.8×2.3×2.55 12.8×3.0×2.55

Copy right © 2018   JIANGSU VNKE ROAD MACHINERY TECHNOLOGY CO., LTD.   All Rights Reserved